The following profiles are different temperature settings for PETg for print head 1, and HIPS for print head 2.
Infill is set at 100%, and supports are disabled. The heated bed is set at 85C, and does not need to be changed.
When using one of these profiles please set the infill and support settings as needed.
| Temperature Profile | KVP Edge Glow Glass |
KVP Pearl Blue |
KVP Edge Glow Red |
KVP Edge Glow Yellow |
KVP Pearl Ruby Red |
KVP White |
KVP Black |
| 230C | Yes | Yes | Yes | ||||
| 235C | Yes | Yes | Yes | Yes | |||
| 240C | Yes | Yes | Yes | Yes | Yes | Yes | |
| 245C | Yes | Yes | Yes | Yes | Yes | Yes | |
| 250C | Yes | Yes | Yes | Yes | |||
| 255C | Yes | Yes | |||||
| 260C | Yes |
Profiles may be imported and managed via the Ultimaker Cura profile manager.